Protective measures and working process of straw packaging machine

In the past, straw packing machine crops in our country often burned the straw after harvesting the part of the income, causing a lot of air pollution and safety hazards. How to properly deal with the problem of straw disposal after the harvest of straw crops is a major social problem. Many parties are focusing on the recycling of straw. The project has achieved results. In the subject of straw packing machines, how to transport straw crops reasonably is another important issue. Our company focuses on research on the compression and packing of straw crops and has successfully developed several models of straw balers, which can easily cope with the compression and packing of many straws such as wheat straw, straw, reed, and corn stalks. Next, let me introduce our company's straw packing machine.

Here is the content list:

l Introduce the straw packing machine in detail.

l What are the safety protections of straw packing machines?

l What is the workflow of the straw packing machine?

Introduce the straw packing machine in detail.

The straw baler is a straw packing machine that uses the hydraulic principle to compress straw, straw, etc. into blocks, which is conducive to the storage, transportation, and utilization of straw. straw packing machine is now widely used in the agriculture and animal husbandry industry and has played a huge role in the protection of the environment and resources. Zhengzhou Xieli Construction Straw Baler can be applied to cotton, wool, waste paper, waste paper boxes, waste cardboard, yarn, tobacco, plastic, cloth, woven bags, knitted velvet, linen, sack, tops, hairballs, cocoons, Silk, hops, wheat wood, grass, waste plastic bags, and other light foaming and loose materials. The straw packing machine can press green storage straw, pasture, dry corn stalk, rice straw, wheat straw, various straw scraps, waste plastic film, etc., for bundling, but automatically bagging and packaging.

What are the safety protections of straw packing machines?

1. After the equipment is installed, the grounding protection terminal in the electric control box must be connected to the grounding angle iron with a wire diameter of no less than 16 square millimeters (the grounding protection angle iron is installed by the customer). If the grounding protection is not connected, the operation of straw packing machine is prohibited. Check whether the grounding protection wire is well connected.

2. Non-professionals are forbidden to open the electric control box for maintenance.

3. Users are forbidden to modify the electrical system wiring by themselves.

4. Users are forbidden to adjust the system pressure by themselves.

5. It is forbidden for users to replace the original accessories on the equipment by themselves.

What is the workflow of the straw packing machine?

1. Unwinding tensioning: a chuck rises to clamp the plastic leading, the belt-feeding wheel reverses to unwind the belt, returns the excess plastic belt to the storage box, and tightens the bundle. Subsequently, the manipulator clamps the plastic belt and further tightens the package to the adjusted tightness.

2. Unpacking: The straw packing machine is removed from the bundled plastic band, and the chucks are reset to complete the packing.

3. Tape feeding: The feeding wheel rotates forward to send the plastic tape from the storage box to the track, ready for the next packing.

4. Unloading: The above is the single-channel packing process. When the machine is in the interlocking state, it will directly enter the unloading tensioning program after the tape is sent, and continue to cycle according to the above program.

Sunrise machinery has developed a variety of straw packing machines and conducted a lot of tests before leaving the factory to ensure quality. This straw packing machine not only has a large exhaust capacity but also has strong endurance. If you are in the straw packing machine business, you can consider using our cost-effective products.